Suggest gearing for 9L on 14 cells and UE diffs
 

topic says it all. I got tired of waiting for a 8Xl to be in stock so im getting a 9L and 9920.

I'll get the 8XL later.

I would say 18/66 on 32 pitch.

or do you use mod1?

No i don't use mode1.

18/66 is WAY to high. its more like 14/66

Iwas thinking about a 15 66 squee. 14 don't sound bad. ;)

I ran 16/66 when I had it, then switched to 14/51.

oops:007: i didnt see the ue diffs part...about 16/66 for ue diffs.

How come, My HV-maxx ran fine pulling wheelies in 2nd on 18/66?

And im sure the hv maxx is less of a motor than the 9l.

the 9l will have a higher kv under load than the hv since its sensorless and the 9l will pull some serious amps under load with a high gearing were as the hv will just thermal like usual :p

You just keep on running it emaxx kid. If it works for you then it is good. I fried one like that. Hey you could get a real brushless then. :D

I have a 7xl/9920 on 16 IB3800's :)

That is what I am talking about. It smokes the hv maxx probably.

There's no probably about it chc.....:D

Probably? I think it WILL and DOES smoke it ;)