Traxxas Slash Pricing Help
 

Hey, guys and gals. You think you can help me with pricing my Slash is a roller but almost RTR? Thanks in Advanced Just needs a motor and batterys. Well here is the mod/parts included list and Pics

Traxxas Steel Output Yokes
Traxxas Steel Output Yokes MOD (Used on Axles)
Traxxas 48p 90T Spur
Traxxas 48p 83T Spur
Traxxas Caster Blocks Aluminum Blue
Traxxas Wheelie Bar
Traxxas Front A-Arms 3 (Extra)
Traxxas Front Bulkhead (Extra)
Traxxas Slash Tires/Wheels (4)
Traxxas Gear Covers (2)
Traxxas XL-1 Speed Control
Traxxas Steel Idler Gear (Extra)
Traxxas 48p 28t Pinion
Traxxas 2019 Receiver
Traxxas TQ2 Remote
Traxxas Stock Body Red (Basher)
Traxxas Stock Body Black
RPM Rustler Front Bumper
RPM Front Bearing Carriers
RPM Rear Bearing Carriers
RPM Front A-Arms
RPM Ruslter Rear A-Arms (Extra)
Robinson Racing 48p 15t Pinion
Robinson Racing 48p 12t Pinion
ProLine Road Rage II 2.2 Tires on Traxxas 2.2 Wheels (2)
ProLine Moab 2.2 Tires on Traxxas 2.2 Wheels (2)
Lundsford Racing Titanium Hinge Pin Kit

http://img163.imageshack.us/img163/709/img2229ot.jpg

http://img521.imageshack.us/img521/6321/img2228a.jpg

http://img411.imageshack.us/img411/6062/img2227b.jpg

http://img717.imageshack.us/img717/7362/img2226p.jpg

http://img697.imageshack.us/img697/1/img2225g.jpg

http://img369.imageshack.us/img369/6835/img2224.jpg

http://img294.imageshack.us/img294/2254/img2223a.jpg

http://img691.imageshack.us/img691/184/img2222s.jpg

http://img687.imageshack.us/img687/5905/img2221e.jpg

http://img517.imageshack.us/img517/3048/img2220q.jpg

10 Pics Per Post

http://img13.imageshack.us/img13/8523/img2218tp.jpg

Whatever you spent in total minus 70% = what you'll get back from selling it generally.

I wish that was a joke too... :cry:

How'd you put steel outputs on the stub axles!?

Neil is accurate in his assessment.

They're TRX part #4628X

I think 70% depreciation is a bit steep. I'd say you can get 40-80% of the original price when reselling RC's, but it all depends on condition, brand/type of vehicle, buyer demand, etc. Always price it slightly high, because people will try to talk you down, and you can always discount later if no one is biting at the original price.

I use the 40-50% mark as a guide on pricing things like rollers and closer to 70% on electronics.

if you look on rctech, this is what most people do. sometimes, you can get used truggy and buggy rollers as low as 30%. the slash is a pretty high demand truck right now, so you should be able to get around 50-60%

I read neil's post wrong, I was saying 70% of original value. probably between 50-70% depending on the buyer. And PBO, I am familiar with the parts, I have them for my tranny outputs, I've just never seen them on the stub axle side before.

I modded them, there was a thread on the Traxxas forums I used to do the Stub Axle mod. I don't know if it's still there but you can try searching for it.

EDIT: Here's the link http://monster.traxxas.com/showthrea...ght=stub+axles

I think it gets a bit like a FS thread... :)