RC-Monster Forums

RC-Monster Forums (https://www.rc-monster.com/forum/index.php)
-   General Discussion (https://www.rc-monster.com/forum/forumdisplay.php?f=20)
-   -   FS: Parted out Neu FLM Flextec Emaxx (https://www.rc-monster.com/forum/showthread.php?t=26265)

blfischer 03.19.2010 10:46 AM

FS: Parted out Neu FLM Flextec Emaxx
 
Have some things left on my FLM All aluminum/Ti Neu Maxx...

Great condition FLM 3905 V1 chassis, Shock Towers and stock trans with single motor mount. I used a single TG servo and an alternate rx mounting set-up.

http://i4.photobucket.com/albums/y12...isandtrans.jpg

http://i4.photobucket.com/albums/y12...hocktowers.jpg


4 Traxxas 124mm 7075-T6 Toe links/ends in black aluminum for all four corners and 2 in the 112mm size I didn't use. Great condition.

http://i4.photobucket.com/albums/y12...xastierods.jpg

Brand new Brushless REVO chassis (with doors and guards), arms and trans that were never used for a Slayer project

http://i4.photobucket.com/albums/y12...andchassis.jpg


Like new FLM F/R Hybrid Bulks with 8 gear Ofna Spider diffs installed (same as UE). Ofna diff 50,000 front, 30,000 rear with Gorilla snot on gear ring. Shimmed meticulously with help from the UE guide and Lito (George16). Smooth and bulletproof.


http://i4.photobucket.com/albums/y12...ybridbulks.jpg

8 Ofna Rear aluminum Buggy shocks that fit the e-maxx perfectly. Comes with the all important mounting stand-offs. Recently filled and sealed with Ofna 30/yellow springs Great condition - no bent shafts.

http://i4.photobucket.com/albums/y12...OfnaShocks.jpg

Flex Tex Titanium Arms - Rare and now discontinued... expensive but awesome. like new condition comes with Hardware, various shafts that I have left (the ones that are straight - should make more than 1 set) and extra bushings.

http://i4.photobucket.com/albums/y12...er/flextek.jpg

Aluminum maxx wheels like new, new Mashers very low wear

http://i4.photobucket.com/albums/y12...ndmunchers.jpg

2 pairs (4 total) - brand new MIP CVDs for a emaxx 3905... never got around to putting them in

http://i4.photobucket.com/albums/y12.../MIPshafts.jpg


Also... no room for pictures....

Proline Servo Saver and a Golden Horizon steering link. Like new. One of the arms is trimmed very slightly for rub clearance.

Ofna 17mm adapters (gun metal)

Golden Horizon (I think) 17mm blue adapters

Golden Horizon Silver Aluminum rx box, great condition, no marks


RPM emaxx 3905 axle carriers - black with oversized bearings and pillow-ball setscrews and caps. good condition


All times are GMT -4. The time now is 05:27 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.