Hyper 10sc brushless motor dilemma...
 

Ok...quick question to all you hyper 10sc owners and/or brushless experts....I want a setup that runs cool and will give me the longest runtimes...I've already decided to get the mmp...all I need to get is the motor...I have a bunch of these 2s 30C 5200mah lipos and I can't decide Which motor to run...either the HV novak 4.5 (5000kv) or the HV novak 5.5 (3700kv...I think)....I know low kv high voltage is the best but I really want to stay running 2s lipos....will the 4.5 be too hot? If I get the 5.5, will I be able to gear it up without overworking the lipos?....really only shooting for 35-40mph but Id rather pick torque over top end speed...why do you guys think?

The Novak 4.5HV and MMP is currently the best combo IMO. I run this in my slash 4x4 and temps are never over 130F

I believe the 5000 kv rating is unloaded so its probably closer to high 3000 or lower 4000 kv. Either way, its been perfect on 2s for me.

Also, the speed passion 550 motors work great and Novak has the 550 ballistic motors comming out soon

4.5 should do well, stayed ice cold when I ran one on my CRT.5

what motor is the $.5???...jk :) ..thanks for the help guys...to save money i'm gonna get the hyper 10sc roller/4.5 novak HV combo over at nitrohouse.....its only $399 .....and right now i have $415 in my paypal....and i want to get up and running asap...i'll eventually get the mmp prob next month but for now i'll see how the hv havok pro does....

Will a CC/Neu 2650 fit in these trucks

Novak HV 4.5 runs great for me. Also have a buddy that runs the HV5.5 and it runs great as well. Either one will work no issues on 2s.

The CC/Neu 2650 will fit. I'm running mine with a 1512 1D finned and it will clear the rear chassis brace with a 17t pinion but I need to shave some of the rear chassis brace with a 15t pinion.

Has anyone checked out the new Orion combos coming out?

http://www.teamorion.com/orion/produ...45_catalog.pdf

Cool thanks Blunten

I saw Blunten setup. Whatever fits in the crt.5, will fit in yours. Heck, a 1515 will fit. A Hacker Cmaxx motor will also work great in it. My buddy runs one in his with a 1/10 Tekin esc. 90 Dollar motor on fleabay.

Motor has a good kv range. I would still use a mmpro with that motor though.

Wil a 3s lipo fit the 10sc baterry tray?

3s lipo will fit if you cut one of the side out.

Thanks for the advice guys!..went with mmp/4.5 combo geared 14/52...and it hauls!...

To get your 2650 to fit did you have to buy the different motor mount or buy the elite motor mount?