CORR Truck (Short Course) Usage Advisory
 

There are special considerations for these types of vehicles. Please visit our advisory page for more details. If you have any questions or concerns, please contact our technical support department for further assistant.

http://www.castlecreations.com/suppo...-advisory.html

Thomas Porfert
Castle Tech Support

Comment: OMGWTFBBQ :lol:

Nice advisory page. The OMGWTFBBQ in the comments section cracked me up.

Awesome! this should keep some newbie questions down as long as they take a look at it.

I'm quite sure CC has been bombarded with questions on what will work and what won't.

Or a lot of OMGWTFBBQ:rofl:

That's the trick: getting people to actually read it! Maybe more people will read it if it was written it in "texting", or posted it on CC's Facebook page.

Wait a minute! Castle has a facebook page!!!!! Where have I been? I'm definitely "LIKE" their page!

what about the 1717 in a 2wd corr truck?


i think you missed that one on the list

+1!!! adding now

I don't see the 2200 either...

You had me at Dos Equis, but XXX and an OMGBBQ?




I'm game

Hey guys if i want to run the 2650kV on 3s in my slash 4x4 what would be the lowest "C" rating that i need?...20, 25, 30?

I already have a mamba monster ESC i'm thinking about buying the 2650 to pair up with it and throw in the slash

And also with the slash geared for about 35mph will this setup stay nice and cool?

Now that should be simple enough for anyone to understand.

Lipos capable of 120amps or more are required, as per stated in the manual.

As for temps, it should do just fine, but check reguarly during the first run or two with an IR temp gun:

motor = 180*F max, ideally 120-160
esc = about the same, ideally 100-140
lipos = 140*F max, ideally 120 or less

Ok thanks man!

I think i'm going to be concentrating mainly on the slash 4x4 this year and i've decided i'm deffinatly going to run the 2650kv on 3s 5000mah