new tekin SC4X motors.
 

does anyone know if these are 2 pole or 4 pole?

I'm 99% sure that they are 2 pole

It is a 2 pole 3 slot motor. It will have adjustable timing with a smaller range than the standard 1/10 motors.

4.5 is around 5000kv, 5.5 is around 4000kv.

thanks guys

Is there a sensor cable with it??
Anyone know???

I would think so, as my RX8 sytems came with a cable.

Okay, the places I have looked, it says nothing about it is with
So I hope it is with.
Are only waiting for it comes, it is pre-ordered

Now that I'm thinking about it, my 1400kv 1/8 motor which was purchased seperatly didn't come with a cable.

For anyone from Tekin: are there any plans to release lower kv winds in the future?

We are considering lower kv's but we'd need a good reason to make them.

This motor should have a cable in the box. All of our sensor cables are underneath the foam in the package.

There was a cable when I purchased the RX8 ESC and Truggy motor combo. But there was no sensor cable included with the buggy motor.

Got mine 5.5... cable was in the box..... when my conversion comes i'll report in! I was told to gear tall 4 teeth taller than normal in the pinion!

5.5 IN THE SCT TEN NOW... TEST AND TUNE AT THE TRACK SUNDAY!
http://i21.photobucket.com/albums/b2...h_P1060346.jpg
http://i21.photobucket.com/albums/b2...h_P1060348.jpg
http://i21.photobucket.com/albums/b2...h_P1060351.jpg
http://i21.photobucket.com/albums/b2...h_P1060352.jpg
http://i21.photobucket.com/albums/b2...h_P1060353.jpg
http://i21.photobucket.com/albums/b2...h_P1060357.jpg
http://i21.photobucket.com/albums/b2...h_P1060344.jpg
http://i21.photobucket.com/albums/b2...h_P1060322.jpg