![]() |
FS FLM Rustler
With a heavy heart I am taking a step back from the RC Hobby. I am getting closer to becoming a pro photographer and the gear cost is amazing. This is probably my favorite RC, the FLM Rustler. It is not a racer but a fun as heck basher. You can do anything to this truck and it will keep going without missing a beat. I have not run it too hard though just look at the pictures below. This truck was built with the advice from this forum and Mike at RC Monster (Where the majority of the parts were purchased). Please e-mail me if you are interested dadgummit@sbcglobal.net , i do not want to have to go to Ebay!!! Please e-mail for price and any information. Please no trades. Thanks for looking!!
Rustler Parts breakdown: NOTE: All FLM parts have lifetime warranty FLM Aluminum Rustler Chassis FLM Aluminum Extended A-arms FLM Shock Towers FLM Aluminum Transmission with Steel top + idler gear and RC Monster Steel diff Gear Metal dog Bone kit (RC Bros) Kit Stampede wheels and Tires Fiegao 7L brushless motor with RC Monster Heat Sink Extra set of Proline Moab tires on RPM wheels Lundsford Titanium Tie Rods etc Revo Slipper Clutch with 32 pitch gears Castle Creations BEC not installed RPM Knuckles on all 4 corners TRX Aluminum Big Bore Shocks on all 4 corners JR XS3 FM Transmitter with second receiver (for another vehicle) Hitec HS-5645MG Servo RPM Front Bumper Aluminum Wheelie Bar with Oversized Wheels (you will need it!) 2- IB4200 7-cell battery packs, have nto been charged in at least 6 months so not sure on condition 1 Neu 5000mah 2-cell lipo holds charge just fine, I just used it to run the rustler in the driveway to make sure it runs good. HUGE Box full of spare parts for this project and many others: 6-8 kinds of shock oil, diff grease, new cans of paint for polycarbonite, tons of shock springs + parts, etc Enough alloy and Stainless hex screws to make maybe 2 more rustlers + You will need an ESC Here are the pictures: Click here for high rez versions of the below http://dadgummit.smugmug.com/Other/F...86876832_ayAsX <img src="http://dadgummit.smugmug.com/Other/For-Sale/IMG0027/986876832_ayAsX-L.jpg"> <img src="http://dadgummit.smugmug.com/Other/For-Sale/IMG0030/986880072_ZtVhQ-L.jpg"> <img src="http://dadgummit.smugmug.com/Other/For-Sale/IMG0032/986883154_cYPyp-L.jpg"> <img src="http://dadgummit.smugmug.com/Other/For-Sale/IMG0033/986886812_Zw7VJ-L.jpg"> <img src="http://dadgummit.smugmug.com/Other/For-Sale/IMG0034/986889690_9jxgS-L.jpg"> <img src="http://dadgummit.smugmug.com/Other/For-Sale/IMG0036/986860113_4b2vv-L.jpg"> <img src="http://dadgummit.smugmug.com/Other/For-Sale/IMG0037/986862782_nqr5A-L.jpg"> <img src="http://dadgummit.smugmug.com/Other/For-Sale/IMG0038/986865731_ErJTt-L.jpg"> <img src="http://dadgummit.smugmug.com/Other/For-Sale/IMG0042/986870601_iGTyN-L.jpg"> <img src="http://dadgummit.smugmug.com/Other/For-Sale/IMG0044/986873904_oVRwL-L.jpg"> |
| All times are GMT -4. The time now is 07:48 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.