New RCM RC8 Motor mount
 

Mike could I get a photo of the New RCM RC8 motor mount assembled.
Thanks
Will

No assembly required. :)
The new mount is the same style as the Losi ten T - the steel bushing is attached to the motor with the included screw(m3 and m4 screws are included) and functions as the lower mount screw. If using m3 screws, the aluminum bushing is used in the upper screw slot, along with the included m3 socket screw. If m4 screws are used, then the included m4 button head is used in the upper screw slot. :)

Thanks Mike that is what I thought.BTW my 1520 flexes away from the mount when tightened down.This doesnt happen with my 1515 series or 1518.

Sounds like the front face of the 1520 isn't flat to me.

Fit and finish on these new RC8 mounts is 2nd to none.A+++