Huge Garage Sale!
 

Garage sale time, I need to get rid of some things I don't use anymore. I have been concentrating on racing, so I can really use the money. I would much rather give a fellow RCM member a good deal than to let stuff go on e-bay.

X-ray M18T/M18MT
Started as a M18MT and I got the parts to change it to M18T. All the parts to change back to MT included (extra shocks, body, wheels/tires). Car only has 5 or 6 battery packs run through it. I thought it would be good in the house, but then I went and over powered it with the big Lehner motor. It is quite fast on just 2s, on 3s it would be stupid fast.
It has installed:
Mamba Micro Pro
Lehner 1020/12 (5000kv)
Multiplex Polo digital servo
12mm hex hubs (can use touring car tires)
Jaco Prism low profile touring car foams
Other parts I have for it (new, not installed):
Mamba 4200 motor
steel universals (stock are plastic)
Aluminum shocks w/several rebuild kits
touring car rally tires; one set HPI knobby style, one set HPI Pirelli treaded style with star wheels
Misc. 1/8 shaft pinions to fit the Lehner motor, and a spur gear
Also Included
Hitec servo (used once or twice)
a 1500mah 2s Limn batt and a 1400 nimh batt
Even have the original box and instructions plus some other bits and pieces not listed as well as all of the original kit parts

http://www.rc-monster.com/forum/atta...3&d=1286761077

http://www.rc-monster.com/forum/atta...4&d=1286761077

HPI RS4 touring car
An oldie but a goodie. This was one of the first in the country as I pre-ordered it when it came out. This is THE car that made touring cars take off in the US. It has seen very little use since I got it to try touring car racing and they had two races then lost the track. I have used it a few other times over the years, but still very low miles. This car has a transmission (similar to a stealth) in the rear with belt drive to front. Only has one or two runs after diffs rebuild (carbide balls) and new cvds. I still see parts for this on ebay as well as some online shops, and some newer model rs4 parts fit as well.
It has installed:
Hitec HS-635 servo
HG lightweight outdrive in front (1 or 2 runs)
MIP shiny cvds (1 or 2 runs)
Ti turnbucles
HPI X-pattern belted tires
Parts included:
Castle 7700 motor (used)
Suspension/chassis parts (new on trees)
HG lightweight outdrive (new)
2 new belts
Tires/wheels (most new and unglued)
A couple of 3800mah 3s Limn (Apogee) batts and some Nimh batts (used)
Even have the original box and instructions plus some other bits and pieces not listed as well as most of the original kit parts

http://www.rc-monster.com/forum/atta...5&d=1286761077

http://www.rc-monster.com/forum/atta...6&d=1286761131

Sportwerks Mayhem/Turmoil Pro
Electric conversion (of course), click link in my signature to see some pics of the car, sold as roller with no electrics
All new front and rear assemblies (with 1 or 2 runs) on old chassis, but a new chassis is also included, so nearly a new car!
All carbon fiber top plates/ radio plates
I have literally a mountain of spare parts for this, PM for pics if interested. Nearly enough to build a second car and still have spares. WAY too much to list!
Very cheap... name your price

A couple of Mini LST's
One is a MLST2 complete with all stock electrics/radio and lipo upgrade, needs a diff and body posts
The other is original MLST roller for parts, I think it has enough to make the needed repairs to other rig
Very cheap... name your price

I have a radio system that can go along with one of the cars, or sold seperately:
Spektrum DX3 (first model) with standard receiver and metal gear servo. This can be used to make the above cars RTR. Or pick this up with the esc/etc below for a full electronics package.

I have a great electronics set up for up to 8s use:
MGM 16024 ESC - 160 amp, up to 8s (has latest firmware), will include the USB-com and cable for computer programming
Dimension engineering sport BEC - up to 8s
MRC Super brain 989 charger - up to 8s (no power supply)


A few sets of wheels and tires available for price of shipping:
Stock Muggy wheels/tires (420 size) 50% tread
MT size bowties 23mm hexes, good tread
Mashers on 420 rims

PM me if you need more pics. I would prefer to sell in complete package deals, as it gets rid of all the extra bits, saves on shipping, and gives you the best deal. I prefer to take offers, as I really need to get rid of this stuff. YOU just tell me how much you want to pay!

More Pics!