RC-Monster Forums

RC-Monster Forums (https://www.rc-monster.com/forum/index.php)
-   General Discussion (https://www.rc-monster.com/forum/forumdisplay.php?f=20)
-   -   FS: E-Revo RTR and extras (https://www.rc-monster.com/forum/showthread.php?t=28359)

Drivinfast247 10.20.2010 01:03 PM

FS: E-Revo RTR and extras
 
I am getting ready for winter so its time to sell again.

Here are the specs:
E-Revo BE w/MM and 2650kv
Futaba Magnum 2PL FM tx/rx
Hot Racing Double-up slipper kit.*
RC Solutions alum. rollcage.
RPM axle carriers w/acer bearings**
Traxxas red ano push rods*
Traxxas GTR shocks w/variable damping kit #2 installed(have others also)*
Traxxas shock boots*
Traxxas CVD axles*
Traxxas CVD drive shafts*
Fresh rebuilt front and rear diffs with RD Logics gear box and full acer bearings**
Traxxas 17mm adapters with brass insert to stop wear*
Team Losi truggy wheels and tires
Momentum bashing wheels and tires*
RPM f/r blue bumpers and brackets*
CC Blower(never used)*
Hyperion EOS0615i duo3 charger*
(2)Hyperion EX 45-90c 5000mah 2S (about 25 cycles)
(2)Turnigy 40-50c 5000mah 2S (8 cycles)

Everything listed above is less than 3 months old except: chassis, rollcage, f/r bulkhead braces, pivot balls(have new ones in bag), ESC and motor. Other than that EVERYTHING ELSE HAS BEEN REPLACED.

*less than 3 months old
**Acer Racing stage 2 Polyamide sealed bearing
***the body and tires are now used

PM for price. shipped to conn. U.S. only!!



http://img207.imageshack.us/img207/5...ag0077c.th.jpg
http://img153.imageshack.us/img153/525/imag0078g.th.jpg
http://img259.imageshack.us/img259/5...ag0079c.th.jpg
http://img256.imageshack.us/img256/6...g0086kc.th.jpg
http://img686.imageshack.us/img686/183/imag0085n.th.jpg
http://img403.imageshack.us/img403/4...g0084mn.th.jpg
http://img230.imageshack.us/img230/1...ag0083s.th.jpg
http://img258.imageshack.us/img258/5...g0082yo.th.jpg
http://img706.imageshack.us/img706/5...ag0081v.th.jpg
http://img842.imageshack.us/img842/6...ag0080l.th.jpg


All times are GMT -4. The time now is 06:09 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.