RC-Monster Forums - 3.5 mm bullets on 1406 motors?

RC-Monster Forums (https://www.rc-monster.com/forum/index.php)

- Castle Creations (https://www.rc-monster.com/forum/forumdisplay.php?f=34)

- - 3.5 mm bullets on 1406 motors? (https://www.rc-monster.com/forum/showthread.php?t=28541)

ksb51rl

11.11.2010 06:19 PM

3.5 mm bullets on 1406 motors?

The pdf image on this Neu - Castle 1406 motor page (actual pdf link not working) shows the motors to have 3.5 mm bullets. I realize the smaller motor systems use the 3.5 mm connectors, but AFAIK the 1:10 and larger systems use 4 mm or 6.5 mm bullets. Why the change and which Castle Creations ESC are these motors supposed to plug-n-play with?

bruce750i

12.29.2010 11:45 PM

The neu-castle 1406,1410 motors run 4mm connectors same size as SwSct, MM & the MMP esc's use.

whitrzac

12.30.2010 01:56 AM

I ran 3.5mm bullets in a 1/8 buggy...(5s/1400kv)

404 error problem not found...

Pdelcast

12.30.2010 05:11 PM

Quote:

Originally Posted by ksb51rl (Post 387213)

Thanx for pointing out the error! That document should show 4.0mm connectors, not 3.5mm.

All times are GMT -4. The time now is 11:19 AM.