Nick's Slash 4x4 "Powered by Insanity" Project
 

Hey guys,

I'm sure a lot of you know me from my Slash 4x4 videos here:
http://www.youtube.com/user/nicksourceUK
...If you are already a subscriber, hello fans! :D

I'd like to share with you my project. ;)

Powered by a Neu 1527, MGM X-Series and 6s Lipo, it boasts some serious power and I hope this weekend I get to do the first big test run, so stay tuned.

I've done a lot of custom modifications, from a 10mm stainless steel centre driveshaft, front mounted servo and other chassis alterations.


Neu 1527 next to Castle 2200kv:
http://www.msuk-forum.co.uk/uploads/...981_113795.jpg


MGM X-Series next to Traxxas VXL:
http://www.msuk-forum.co.uk/uploads/..._981_68605.jpg





Read and see it all here:
http://www.msuk-forum.co.uk/topic/96...pics-must-see/

I look forward to your questions and comments. :)


and by the way... it's not staying in the Slash lol :rofl: this is just something to waste some time on, before it is dropped into a 1/5th.

Nick.

You know an axe will do a much better job making a slash into 2 peices :lol:

Going to be a beast for as long as it holds together!

It's defiantly expected, lol.

First proper run tomorrow I hope, if the MGM holds up okay, had some issues programming it but all sorted now.

6s on 20/36 gearing. :) I have a video of it on 3s and 20/52 gearing, it was rapid.

The Neu 1527 is so so smooth, beautiful motor.


I've spent a little on beefing up some parts of the Slash, MIPs all around and fabricated a custom driveshaft (that joins direct to the outputs rather than using splines like stock). Obviously there will be an issue with flexing which I can't resolve easily, I've ordered a New Era roll cage which should help. Straight line runs until then!


http://www.msuk-forum.co.uk/uploads/..._981_57290.jpg

Sweet baby jesus that will be a monster!

That is simply MONSTER!!! You are going to strip the teeth off you spur gear....metal or otherwise.

Nick your 4x4 is insanity at its finest.

As usual I expect nothing more than videos of all the carnage!

Beyond sick, hope the diffs hold long enough to have some fun ?

Can't wait to see some video ! ! ! ! !

Killer Killer project.

Amazing, I can't get over having a 10mm shaft in a 1/10th scale truck :D

Looking forward to videos

On the other site you have that the 1527 is a "0.5Y", what KV is that ??

the diffs hold up great in the little 4x4 because the truck is so light and the tires arent wide enuff to make traction:lol:

Thanks a lot for the comments guys. :D

Diffs and slipper shaft are my only concern, I intend to be gentle for the first, oooo... 2 minutes at least, lol.

0.5Y is the 2500kv Competition Wind. :)

I'm tagging along for this one! Ive watched your videos on YouTube and they are so entertaining to say the least, great job and keep it up!! Your videos have made me want to get the slash!! Tough truck thats for sure...

Hey Nick!
Nice to see you are still after the sick power.
Hope it doesn't fly to far up in the air.

Bonkers... :yes: