6x6 Nemesis
 

Well I had a hard time keeping the front end down so instead of a wheelie bar I added a second set of rear tires:intello:
More pics to come.

some more
 

some more

Wowzer!! Very interesting!! How did you fab up the middle diff case?

The Nemesis diff cases are aluminum and split right down the middle just use 2 pinion sides and a little grinding on the case to make it all line up. The chassis extensions are made out of 4mm 7076 T6 aluminum Still have to build the top brace. Wheel base is 24"

Is that the natural split in the case of did you have to cut it in the middle? I'm not familiar with the Nemisis specifics.

Off topic: what kind of dog in your avatar?

They come split just use 2 cases to make one.

I missed your second question. the dog is a shih tzu normally there about 12 pounds but he is like the increadable hulk of his kind he's 23 pounds and not fat at all . His name is Teddy and he never met someone he doesn't like

Cool, I did a 6x6 maxx and a 6x6 lst a while back. Looks like that nemesis diff case is alot easier to rework than the maxx and lst cases. I ran the mess out of my maxx, never got the lst powered... Maybe one day.

The Virgin Mary?? Or are we talking about Allah's mom?

almost there
 

Here are a few more, should be done this weekend

Do you think the Nemesis diffs would fit in a set of Maxx bulkheads?

Don't know , I have a set of Maxx bulkheads I will take some measurements and let you know

They likely will, might need shims on the case like the lst diff does.

I've always wanted to do an 8X8 Maxx, I'll have to check on these Nemesis diffs.


Linc- you still have the 6x6?