Ofna steering knuckles on a maxx
 

Hi all... I am not sure if this was already cover... i searched and found nothing... Can Ofna Knuckles work on a Maxx?

Here is an example of one I was thinking about:


http://c456141.r41.cf0.rackcdn.com/i...n/ofn36901.jpg


Thanks
Alien

CLICK This is a thread I made a few months ago.

The ones you posted from OFNA might work. What are the bearing sizes? If you order them you will probably need OFNA pivot balls. And you probably will have to mod it work. Probably will need different cvds.

Let us know the outcome!

-Zack

Hi Zack, thanks for the link... I will be using Hong Nor 8mm CVDs with 16X8 bearings... One more questions... do you know if the Onfa pivot balls have the same thread pattern as the maxx's?

Alien

If your using plastic arms it shouldn't be a factor at all.

I am using UE Widetracs...



http://lh4.ggpht.com/_4vPm5E8J5HA/S6...2/DSC_3125.jpg

I never had a OFNA. You might try to find someone you know to have an ofna. Chances are they have some Maxx parts and could try the fit.

Well... I posted the question on the UE forum... just waiting now...


Alien