Carbon fiber bottom plate for FLM10700 LCG chassis
 

Thought I'd share some pics. It was cut by hand, so it's not the prettiest piece ever. After cutting I finished the carbon fiber ends off with some CA glue.

I really think FLM should offer some nice carbon fiber plates for this chassis. It works extremely well and won't bend or get scratched like the aluminum bottom plate would do.

https://lh3.googleusercontent.com/-0...0/IMG_0694.JPG

https://lh5.googleusercontent.com/-W...0/IMG_0695.JPG

https://lh4.googleusercontent.com/-3...0/IMG_0696.JPG

https://lh4.googleusercontent.com/-l...0/IMG_0697.JPG

https://lh4.googleusercontent.com/-p...0/IMG_0813.JPG

Here's a small running video in case you are interested )http://www.youtube.com/watch?v=McQeofeKA8Q):

[YOUTUBE]http://www.youtube.com/watch?v=McQeofeKA8Q[/YOUTUBE]

That plate looks good!!!

That was a close call at 1:30 in the video... And you should consider painting some lines on that nicely manicured yard and start turning some laps!!