Lilpanther's MBX5-T Brushless Conversion
 

Hey guys, I picked this up because I've always wanted a 1/8 truggy and finally found a roller for a decent price. It got here a few month's ago and had all the nitro stuff except the motor on it so first thing I did was take all that stuff off and start planning on how I want to do the conversion. I ended up using the RcMonster conversion mount for it and a castle 2200 in it with a Hobby King 120a esc. Here are some pictures of it as it as I got it with the nitro stuff removed.

http://i566.photobucket.com/albums/s...ps25602f61.jpg

http://i566.photobucket.com/albums/s...ps110d30b3.jpg

http://i566.photobucket.com/albums/s...ps5b24a742.jpg

http://i566.photobucket.com/albums/s...psb4dd8a21.jpg

Then I got a Proline Bull Dog body for a MBX6-T and trimmed it up to fit and it is waiting to be masked and painted. I also picked up a Turnigy Heavy Duty 4000mah 4s Li-Po thats rated at 60-120c.

Here is the body trimmed up and fit on the truck.
http://i566.photobucket.com/albums/s...ps6cb5ca58.jpg

And the battery I picked up for it.
http://i566.photobucket.com/albums/s...ps0b728656.jpg

Yesterday was a pretty good day for the MBX5-T. The RC-Monster motor mount, servo plave, and pinion gear came in and I was able to get the truck all together. I went to my LHS Tuesday to get some paints so I could try to paint the body but they didn't have the colors I needed so I still need to order paint's so I can get the body done but other than that the truck is done for now.

Here is the RC-Monster motor mount.
http://i566.photobucket.com/albums/s...ps3d0a1ef2.jpg

Here is the servo plate and the 17t RC-Monster pinion.
http://i566.photobucket.com/albums/s...ps4b90f599.jpg

Mugen script with the RC-Monster dude on the back of the motor mount.
http://i566.photobucket.com/albums/s...ps9bb637a4.jpg

Just because I was curious I pulled out my Castle 1717 to see if it would fit in the truck with the RC-Monster motor mount and it pretty well does, The rear chassis brace hole needs to be moved over because it hit's the can but other than that the motor would fit. I am not going to run it in this though because my battery tray is only mean for 4s and I don't like running the 1717 on anything other than 6s.
http://i566.photobucket.com/albums/s...ps68d438f4.jpg

Here is the rest of it, I had too many pictures for one post.

So once I finished playing with mounting the 1717 in there I went ahead and dropped the Castle 2200 in it that I am going to be running. I look's soo much smaller in there.
http://i566.photobucket.com/albums/s...pscdf556f4.jpg

Here is the general mock-up so I could find where I needed to drill the holes for the battery tray.
http://i566.photobucket.com/albums/s...ps98bd34e7.jpg

And here are a few pictures of the final lay-out with the battery in it.
http://i566.photobucket.com/albums/s...ps7360fff6.jpg

http://i566.photobucket.com/albums/s...psaa2fda99.jpg

http://i566.photobucket.com/albums/s...psc3d6708c.jpg

Well I took it out for a run today and didn't run it long, The BEC in the ESC didn't like trying to power the Solar D772 Servo so I wired up my Castle BEC in the truck tonight, I've never found a ESC with a built in BEC that can power this servo. I tried using it with a Mamba Max Pro in my Wraith one time and the Wraith wouldn't even move.

Here is a little video from today, Please ignore the hideous Charger body, I ordered my paint's last night to paint the Bulldog body and didn't want to run it without the body painted so "I chopped up an old Charger body that I had gotten with a Revo a long time ago.
<iframe width="560" height="315" src="//www.youtube.com/embed/3NKvldO6ji4" frameborder="0" allowfullscreen></iframe>

Looking good! Should be a blast to drive.

I've always ended up using an external BEC on EVERY car since I was using a Mamba Max to power my MBX5T... It seems to make ESC;s much happier!

Thanks. It handles like it's on rails but isn't fast enough for me yet.

The external bec really does make escs happier.

I took it out for a bash session Saturday with my cousin that now owns my old Brushless LST-2 that I have the build thread on here about and got some footage of them both running.

Here is the video.
<iframe width="560" height="315" src="//www.youtube.com/embed/lln9ExEp8P0" frameborder="0" allowfullscreen></iframe>

I finally got my paint's and stopped by harbor freight on my way home yesterday to pick up another airbrush since my other one is messed up. So I got to finally paint the body last night.

Here were the results.

Freshly painted.
http://i566.photobucket.com/albums/s...ps2dfc3873.jpg
http://i566.photobucket.com/albums/s...ps610ec3db.jpg
http://i566.photobucket.com/albums/s...ps2d06251f.jpg

After getting the lights and grill on.
http://i566.photobucket.com/albums/s...ps6bd15098.jpg


http://i566.photobucket.com/albums/s...ps50bd9ee6.jpg

Looks good, now go scratch that body up.

What no RC-Monster stickers? LoL.

Nick

Thanks.

I think I have some somewhere I just have to find then.