which is more powerful/fast
 

Feigao 380c 6t or the normal feigao 6t. which would be a better choice for a stampede and would the warrior 7020 work good with this motor?

Built on heat sink and won't need an adapter either the 380 c gets my vote.

Both of those motors are way too fast for a Stampede... You can get the Feigao 380C 6L, and that would work well (lots of torque).

x2 i imo the 380c 6L is probably the best motor for the stampede

alright, i was thinkin bout the 6l but now i think ill get it. what controller should i get?the warrior should work fine with it right?

My choice would the the Quark 80 or the MGM 80.

i was thinkin bout the mgm 80 but its a little pricy compared to the warrior 7020. which ones better for the price becuase i got a low budget. im only goin to be runnin 6-8 cells.

Well the MGM 80 is far better than the Warrior 7020 but the Quark better than the MGM.

i dont think the 6l will work with the 7020, as youve got to see if the motors amp draw is less than what the controller can handle. i think the 7020 can handle 70 amps and the 6l is 69, so its going to thermal a few times. i got the 7020 with a 7t, but that wont be enough in a stampede

alright thanks, ill proly go with the mgm 80

I think the 7020 would far ok. The rating isn't something to go by really. Wish the proper gearing I think the 7020 would be ok, but chances are it wouldn't run cool. The MGM 80 is the way to go unless you want to spend a little more on the Quark.

alright thanks for all the help, one last question, will the 380c 6l and the mgm 80 be much faster/effecient then an novak 5800?

It should be.

The motor can also take more cells, so it can be more powerful.

other then an long can motor havin more torque, what other advantags do they have because im actually thinkin of an 380c 8t or 7t.