RC-Monster Forums

RC-Monster Forums (https://www.rc-monster.com/forum/index.php)
-   Brushless (https://www.rc-monster.com/forum/forumdisplay.php?f=12)
-   -   Just wanted to sy hi everyone. Going bl (https://www.rc-monster.com/forum/showthread.php?t=3525)

go4gold 07.10.2006 12:20 AM

Just wanted to sy hi everyone. Going bl
 
After a few days of reading I decided that it was time to chime in.Lets get started with the first question. I want my emaxx to go at least 60mph with a 2 hour runtime with 1 year old six cell packs.What setup do I need for this. Please try and keep it under a hunred dollars. I'm jk, after reading for days I wanted to top all of the other questions that you answered. On a serious note I do plan on upgrading to bl very soon. I already have the warrior 9920 and am looking at the Feigao 8xlwith 7 cell packs I don't care to much about speed but would like descent run times without to much heat cause i don't want to let the smoke out. I apologize for any and all type o's especially missed spaces. My hand is quicker than my brain.Stroke last year. Oh yeah as you can see by my selections I'm a cheap bastard. Haven't worked in 10 months so I have to be cheap when I can so the kids can eat. Anyone know of a one handed controller? Currently I use the TQ3 with some difficulty turning. Too much goin on for one hand. Sorry for being so long winded but I don't get out much anymore.What does imo stand for? I'm new at the short cuts.

sjcrss 07.10.2006 12:32 AM

welcome to the forum ,and I'm sure you will learn alot from the people here. IMO- stands for "in my opinion", also sorry to hear about your misshap or bad luck, I'm not sure on how to help you on that, but once again....welcome.

go4gold 07.10.2006 12:36 AM

In my opinion, Makes sense now. Thanks the light just turned on. I have already learned a ton from everyone been neglecting my family and read through the old posts. Looks like next to Mike squee is the man. Remember Life is to short to be serious all of the time.Thanks for putting out the welcome mat for me.

sjcrss 07.10.2006 12:46 AM

no problem, I'm sure I'll see you around. Also just remember...that no question is a dumb one, just because you don't know or it hasn't been asked yet. One more thing...sometimes your answers can be answered just by doing a search for the info...

Gustav 07.10.2006 01:21 AM

Best i can think of is this,if you're right hand is the good hand then a wheel/trigger transmitter which is either left handed or has the ability to run the wheel in the left hand side (usually for left handed people) is what i would suggest.Sounds odd but here's why;then you can hold it in your right hand and control the throttle with your index finger and steer with your thumb on the back of the wheel.We call this the Batfish technique owing to his lack of a camera man.
if it's your right side that's out of action then a normal right handed wheel transmitter held in the left hand with the same technique.That and plenty of practice is all i can think of unless there's something specific available but i've not heard of one.

i guess this is what you're doing now though so this probably isn't much help.
We'll put our thinking caps on for you though.

Edit: the 8 or 9 XL on 14 cells sounds like what you want,the 9xl will be a little slower but run a little longer,neither should cause heat or smoking problems,geared correctly of course.

crazyjr 07.13.2006 10:46 PM

Quote:

Originally Posted by go4gold
After a few days of reading I decided that it was time to chime in.Lets get started with the first question. I want my emaxx to go at least 60mph with a 2 hour runtime with 1 year old six cell packs.What setup do I need for this. Please try and keep it under a hundred dollars.


Good luck, we're all looking for that magic combo:007: :027:


All times are GMT -4. The time now is 07:12 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.