23 mm adaptors for 6mm axles
 

Hello I have an emaxx with the UE 6 mm axles and the 14 mm nuts. Where can I find some 23mm adaptors to use with these axles. all the adaptors I see are for the standerd emaxx axles with the little pin through it not the hex shape. Thanks

Dace are the apaptors you need. Available in blue and black. They use a 14mm hex.

the dace are real nice. And they work great! I run them with my UE 6mm

Dace only work's with the ue cvd's. Way better than the pin-type cvd adaptor's, since the pin will wear into the alum.

Actually Sneeck, any 14mm hex will fit into the dace....even the stockers. But if you put the stockers on too tight, the pin will wear thru yes.

Doh, yes your right. I keep thinking the dace will go directly on the cvd.

LOL, that's what i thought when they launced them too.. A 5mm hex instead of a 14... :p