gearing and all that!
 

ill be runnin a 9920/ fiegao 10l in a stock revo chassis wit the emaxx tranny and maxx bowties. i was what gearing should i use. and what kind of runtime/ speed can i expect on two 6cell gp3300

knowone?

Sorry, this thread must have slipped right thru..

runtime depends on your driving habbits.. but i aim for 10-15 minutes.

gear it for about 35-38 mph and you should be fine.

ill be using a 66 tooth spur so what pinion should i use? i not that much of a speed freak so 30- 35 is the sweet spot for me.

anyone?

Using BrianG's speed calculator:
http://scriptasylum.com/rc_speed.html
I figured that using 6" tall tires and 1.10v/cell in 2nd gear, a 22t pinion would be good to keep ~35mph as the upper limit.

alright thanx

Is this the answer you are looking for?

Feel free to ask any other question, okay? sorry for the late response.

answered all my questions,thank you. i have one last question, where do u guys get ur 5mm pinions from. i pretty sure the 10l uses a 5mm shaft and mike is sold out.

We get them from Mike, he usually has them in stock.

The appear to be in stock?

http://www.rc-monster.com/proddetail...=5mmmod1pinion

will the mod 1 work with the emaxx spur, i thought they were for against nitro spur gears.

No, the mod1 are for the mod1 spurs.

You need the 32p

thats what i thought, so where can i get 32p 5mm bore pinions other then hear.

p.s mod1= metric or something right? could someone tell me what it is?

If they are not in stock, send Mike an email.

Mod 1 is a 25.4 pitch.