Eqaution...
 

Well... Heres an equation for ya.

http://img291.imageshack.us/img291/9819/pa140311ab4.jpg

+

http://img291.imageshack.us/img291/9819/pa140311ab4.jpg

+

http://www.the-rc-zone.com/images/rctm/rcty-05/july.jpg
(old picture - now has kyosho trays)

=

___________________

:032:

An 18 celled Savage?

Hmm. 9 cells + 9cells + Savage (with batteries already in it) = blank.

Does that mean it blew up? ;)

Since there is no result, shouldn't that be an "expression" rather than an "equation"?

10 Syntax Error
20 read "Does not compute"
30 goto Re-input values
40 end

Missing the
50 cls
finnster..

If you used a schulze controller i know what part is missing!!

=

http://rc.stuurmijmail.nl/BurnedSchulze/slides/6.jpg

Serum,
What exactly happenned to your schulze that made it burn?

Loose contact according to schulze..

You need to convert that into a more current-day object-oriented programming language. That looks like Basic.

That's about the last time I did any programing :)


Format C:? y/n?

Welll..
 

Well.. i plugged in the 18cells and it wouldnt budge. The motor turned a little bit. but that was it.

Plugged in 14 cells.. and it worked fine..

Could something else be wrong except for maybe a bad sodlering job on the batteries?

I always answer "y" to that prompt, but only if it's on someone else's PC. :)

Admiral: It 14 cells works and 18 not at all, that definitely sounds like something is wrong. Could be a bad solder joint, or a bad cell. If able, you could put a small load on each pack (like 50 ohm resistor or something) and then measure the voltage on each cell seperately.

I see a savage and two pics of a heavily abused pack.

Serum got you beat, he got a savage with a 2250 and 20 cells