What's your brushless street cred?
 

This forum has lots of brushless experts with years of experience with multiple vehicles. I'm wondering what brushless setups everyone owns now and has owned in the past. I'll go first with what I've owned in chronological order.

Stampede: Novak GTB5.5 (sold, first brushless system)

Stampede (same one): Mtroniks Truck and Feigao 540 12S (sold the truck and motor)

HPI MT2: Mtroniks Truck and Feigao 540C 9L (sold the truck and motor)

RC18T: Tekin Mini Rage 6.8kv (sold)

Thunder Tiger ST-1: Quark 125B and Neu 1512/2.5D/f (sold the Quark)

Thunder Tiger ST-1: Mamba Max and Neu 1512/2.5D/f (currently own)

in order I think :020:
xxx-t lehner warrior/4200 later upped to 5300 (sold)
e-maxx schulze 18.97 / hacker 8s (sold truck, burnt up esc)
losi xxx-4 hacker comp / lehner 5300 (sold all of it)
losi xxx-t mf edition novak super sport (sold)
another xxx-4 this time novak esc (sold)
another e-maxx hacker comp feiago 8l
losi xxx-t mf2 novak gtb 6.5 (sold truck)
associate t4 novak 6.5 (sold whole thing)
rc18t mamba 6800
back to losi xxx-t mf2 again now with lrp comp and novak motor varying based on track
losi mini-lst mamba 6800 (sold)
kyosho mini inferno st, tekin rage/aon 4900
ofna hyper 8, mamba max/feiago 7xl

wow, now that I think of it I have owned way to many. funny thing is I think i am going to get another mini-lst for the winter.

rc18t mamba 5400 combo 6s nimh
rc10t4 ft gtb 5.5 combo 3s lipo
g2r revo lehner 1950/8, quark 125b and bk12020 5/6s lipo

i still own all of these!

It is hard to remember them all. But here is what I can remember. Not real sure about the Brushless combos. Have run over 80 different BL motors. Have run brushless ever sence Modeltech ruled the world:027: .
All brushless
Pro2
TC3
TC4
6 different pan cars
1/12 coraily
T3
4 or 5 stampedes
6 clods
3 txt-1s
pirate 10
EK4
JT hybrid
Lightning Truggy
4 twin forces
10 to 15 different E-maxxs

Possible more but that is all I can remember.

Thank you,
Promod

Here's my list:

Tamiya EVO III, BK Warrior 7018, Lehner Basic 5300 (Just sold this BL combo)
Now has Mtroniks Genesis Sport Plus and Feigao 380C 9T

E-Maxx, about to install MM ESC and Feigao 540C 8XL

FLM Stampede, BK Warrior 9920, Feigao 540 8S (Just sold ESC to replace with MM ESC)

T3, Mtroniks Genesis Pro, Feigao 380C 6L

B4, MM ESC, MM 5700

Mini Quake, Mamba ESC, Golden Horizons 4700

Vendetta, Mamba ESC, Golden Horizons 4700

RC18T, Mamba ESC, Mamba 6800

I've also used and sold a couple of Mamba 8000 motors and bought but never used a Feigao 9L.

Do the brushless servo systems I design and work on at work count too? :)

:dft002: That sounds pretty credible (incredible) to me. Damn thats alot of money!



Mine not in order, but close...

*Rustler (novak SS-5800), 7020+380-6L, 7020+9L
*Losi XXX-4G+ (GTB 5.5) (sold)
*Mini-t - Quark 33A and hacker then Mamba 8000K
*Emaxx- 3 or 4 diferent setups including Mtronics Truck, then 9920, then Quark125 and Feigao 9L, then 7xl, then 9XL
*Mini LST - Mamba25 ESC and Hyperion 5000kv
*E-Revo - 9920, MGM120/16, Quark125 - 9xl, Neu 1515 2.5d
*XTM XLB - Quark125 + Neu1512 2.5d
*(in process) Ofna MBX-R2 - ESC-TBD, Lehner 1940-7

Rustler - First was a Feigao 8L and 9920, then a Feigao 12s and MGM 12012 now a Mamba Max 4600, all setups on 4s Lipo except the 8L/9920, which was on 12 cells

XTM X-Terminator - Feigao 8L and 9920, then Feigao 540C 9L and Mtroniks Truck, now Feigao 540C 9L and Mamba Max (all on 4s Lipo)

Tamiya Dark Impact - Mamba Max 5700 system on 2s Lipo

PRP Swift - Feigao 8L and Mamba Max on 4s Lipo

Soon-to-be custom Revo - Feigao 540C 7XL and Mamba Max on 5s A123

First brushless was RC18MT with Mamba 8000, TP 2s lipo. Kept that one for about 10 minutes. Went back to nitro and now the proud owner of a BPP LSP with Quark 125b/Neu 1515 1y, and 4S lipo. I still have a few nitros in my stable but will be converting those soon.

Holy SH*T Promod... all of that...?

Rustler SS5800
Stampede Kontrik Twist
Yokomo YR-4 SS5800
RC10T3 SS5800
5+ E-maxxes Basic 4200, 2400, 5300, 3100XL, Dual 1930, Dual 1940
1992 Kyosho Inferno LMT 2800XL
AE MGT
2 LST (version 1)
2 CEN GST
Hobbico Hammer
Mini Quake SE
micro RS4
Mini-T

I've tried quite a few myself... and I only started when the ss5800 came out I think back in 2001... I've used every ESC that was made by shulze....
the first summer that I started Racing some RCs.. I spent $15000.. it was fun... expensive though...

T-maxx(sold)
Mint -T all aluminum and BL
XXX-T crazy soon BL
E-maxx (G-Maxx in month)
RC 18t stock Mamba soon
Xray T2R
Xray m18t

Started with a Novak hv in my Revo G2R
Then got an ss5800 in a T4
Then bought a Mamba Max 5700 for T3
Then got a few motors and a mgm 16024 from a friend( haven't used them yet
now playing with a Mamba Max/9XL in the G2R
Just bought three ss5800's from a dying hobbyshop, at a serious cut for the owner. I'll never go brushed again

Ugg, I'm such an obvious newbie!

• BL Revo V1: Stock chassis, emaxx tranny (single speed), 8XL, BK 20120, 14xGP3300 cells. Spektrum DX3. Now mostly parted out and sold. Only the tranny and slipper left, which I'm not sure I want to part with.
• BL Revo V2: Stock chassis, stock tranny (locked 2nd gear), 10XL, Quark 125B, 14xGP3300 cells (same ones as above actually), Spektrum DX3.
• BL Jato: Mamba Max 4600 system, 2s2p emoli, Spektrum DX3.
• HoBao Hyper 8 (not nearly done): Motor ??, ESC ??, batts ??, Spektrum DX3.

I'm old as dirt, I had to look up "street cred" in my urban slang dictionary! I'm 42 and I have my first BL truck with a full Gorilla setup, UE diffs, CVD's and Supershocks. Running the show is a Quark 125 with a 7XL Feigao. Better late in life than never!

Ok, I don't feel so bad now at 33 years old. I'd probably still just have my first truck if they weren't so darn fun and challenging to build! :)

LOL! I'm 30 and just trying to sound cool! :cool:

Promod, 10~15 e-maxxes, plus all the others? WOW! I just got into the hobby about 1.5 years ago when I saw my friend's Stampede. As soon as I saw it I had to get one myself. I think that Stampedes and Rustlers are gateway drugs!