Pinions???
 

special pinion. all i need to know if i can get someone to machine me mod 1 pinions but will fit a........... i think it was 2mm bore.

looking for about 4........possibly 16t 18t 20t 22t 24t?????

can RCM mike do this? for me?

Sure, send him an email or give him a call. He caould also advise what would work best.

Why such a small shaft with big teeth?

i want to play around with some little 16th nitro and put a nice mamba comp x and 7-8cells:D

thanks guys i really want to do this.....

Don't you think that with such a big pinion on a 2mm motor shaft, that the shaft might break? Are u sure that it is mod1 not 32p?

Bye:018:

ill get some pics one second.

pics alot of close ups. scroll down the page and youll see pics of the mini tranny and sutch:
http://www.rcuniverse.com/magazine/a...article_id=731

.....arg, I can't really tell what pitch the spur gear is from the pictures, sorry......


Bye:018:

anyone know what pitch it is?

It looks like mod 1

Why do you need a 2mm pinion. You could put a 380 brushless motor on one.
I am pretty sure they have a 1/8 shafts. 3.18 mm
Just to let you know. It does look mod 1 from pics. But that can be deceiving.

anyone have any 380 sized bl motors? for a good price, that can match the mamba. about to spend 150buks on bl just so you know...

...That Vulcan looks like a Mini Inferno clone...I have a pretty beat up AON ELECTRIC 5800L that would work...3.2 shaft and I probably have pinions to fit...I am all out of AON 4900's though...The motor i made a household name for the Mini Inferno :D Though i dont expect any of you 'big' scale guys would be aware of that :D

...Mike let me know if you are interested in it and i can mail you the details...