Going BL on my Savage
 

I just fell onto you guys. Any advice on set ups? I am into crawling but would still like to bash a bit. I have reverse and a 3 speed installed. Lots of aluminum due to my nitro bashing days. Extended Chassis and MIP CVD's all around.

I just ordered the brushless conversion kit from Kershaw Designs with the 13T pinion and I ordered a 9T pinion.

Any suggestions would be great.

Thanks,
John

I would go with like a 9xl. You could run on 14 cells with good power and still have a fair speed.

What is a 9xl? I purchased a conversion kit from Kershaw Designs. It comes with a 13T Mod1 Pinion and I ordered a 9T. I am new to this. What would be my best setup for brushless. Like I said I have the 3 speed in it. I would like to be able to do some minor crawling and have the speed for bashing.

Thanks for your help.

John

Please read the sticky in the brushless section, i think it will offer you help.

http://www.rc-monster.com/forum/showthread.php?t=5115

Thanks Serum

I appreciate your help.

Anytime!

If you have got another question, please feel free to ask.. It's not my intention to scare you off with pointing you to that FAQ, but i think it's a relative easy to understand story with useful info for 'starters'

I'll tell you what...I got into rc rock crawling about a year ago and am active on rccrawler.com. It is amazing the willingness people are to help people through a hobby. It is so great to say that I am part of this interest. Most of the people I talk to are very willing to help or point you in the direction you need. My excitement is doing the research and picking other peoples brains.

Thanks again,
John

Great!

I think with the help of Brians speed calculator you can find your way in choosing a motor and the right pinion. if you need any confirmation, just post your choice.

OH BTW. Welcome to the forums.
I thought that may have been you on the rccrawler forum.
You have the same sig on there.
Do you have a txt as well?

TXT and TLT

What is your name on RCC?

I am not a member on there.
I was there looking around some.
I just purchased as txt myself.
I got a thread around here some where on it.
I was thinking of joining over there.

They are great guys over there also.

Here are my rigs...

The orange one is a TXT...

OK here is what I am looking at:

1) Brushless…not sure yet…probably Lipo

2) Currently running 40 series Moabs tires.

3) She weighs in at a wopping 13 lbs. That is with all the nitro stuff still on it.

This truck is hopped up with a lot of aluminum and HD drivetrain. It has the 3 speed tranny and reverse. I would like to rock crawl a little but mainly backyard bash. I am out of the nitro scene and tried to sell it. Too much into it to sell so I thought I would go this angle.

I do have some of the plastic stock parts that I could put back on to lower the weight.

How about this setup:

Feigao 9L with a Castle Creations Phoenix 80 (not sure if I am going Lipo)

Any thoughts.

Thanks for the input.

John

They nice man. Thanks for posting them.
I haven't got mine yet. I got some for buying purposes.
It is stock for most part. I don't want an all out crawler.
Something more like you have planned on savage.
I was wonder if could put a 3 speed on a crawler with 4 link suspension.
I think that be kind of tight.

I wouldn't go phoenix for it is a airplane contoller.
4s lipo 10L motor and a castle mamba maxx with ubec would get you going
nicely. It wouldn't be a speed demon.