The making of my Race bred Revo
 

Hi guys getting excited about this here are some of the stuff i just ordered from Mike
1. http://www.rc-monster.com/proddetail...EMBLIES&cat=43
2.http://www.rc-monster.com/proddetail...NT3108S&cat=44
3.http://www.rc-monster.com/proddetail...TKR1009&cat=44
cannot down load my other pics saying that it is already in the forum well here is the link http://www.rc-monster.com/forum/show...?t=5255&page=2
any comments and suggestions will be appreciated and just waiting for the slipperential and 1/8 diffs to be available

Have fun

Should be a hoot to race!

Id email mike and ask for the best estimate on when the parts will be available.

that's great let us know for any new updates

If you want, i can email mike for you and give you an approximate date.
Let me know.

It should turn out awesome. Have fun with it once finsihed. :dft003:

thanks guys i will update this every now and then with pics. are these items
http://www.rc-monster.com/proddetail...=RE035s&cat=44
http://www.rc-monster.com/proddetail...NT3148S&cat=44
will be good for handling brushless power and good for racing?I just dont like re-building diffs often,If my budget will not be enough buying the 1/8 diffs but definitely will be getting the slipperential

The diff case is good, but the integy cup is crap. Try the flm cups for the revo, they will last quite a good bit.

Update
 

Hi guys just finish installing my Tekno wheelbase and Tekno wing kit,and also my Integy steering kit here are the pics:

that's one sexy servo saver!

Yeah Serum. Now put a de-anod PL arm into it!

LOL! mine is still having all te blue you can imagine.. geee. and i had the deanodize reputation back in the days.. LOL

Nice! Those Tekno arms looks pretty good!

Thanks,do i need to take off the rear bumper since i already have the wing,is proline high downforce wing would be the best bet for racing?

No need for the bumpers if you are racing. I highly doubt you would notice anything in the high downforce wing..