RC-Monster Forums

RC-Monster Forums (https://www.rc-monster.com/forum/index.php)
-   General Questions (https://www.rc-monster.com/forum/forumdisplay.php?f=7)
-   -   E revo (https://www.rc-monster.com/forum/showthread.php?t=6641)

robnrob808 05.03.2007 04:37 AM
E revo
 
I'm New So I Have A Couple Questions. I Bought The Revo Electric Motor Mount,i Wanted Know What Pinion And Spur To Run And How To Set The Driveline. Open To Any Input:027: Thanx From Hawaii:043:

BrianG 05.03.2007 09:53 AM
Welcome to the forums!

You can use the stock pinion and one of the mod1 pinions on this page since the Revo uses a Mod1 pitch for the spur. The bore depends on the shaft diameter of the motor you get, typically 5mm bore. Toth count depends on how you configure the tranny.

crazyjr 05.03.2007 01:42 PM
Quote:
Originally Posted by BrianG
Welcome to the forums!

You can use the stock pinion and one of the mod1 pinions on this page since the Revo uses a Mod1 pitch for the spur. The bore depends on the shaft diameter of the motor you get, typically 5mm bore. Toth count depends on how you configure the tranny.
BrianG, do you mean stock spur?

BrianG 05.03.2007 03:03 PM
lol, yeah, I meant stock spur. I was typing a little ahead of myself. :)

robnrob808 05.03.2007 08:57 PM
Hey Thanx Guys For Your Input.its Been A Big Help:027: :027: Asof Now I Am The Only One That Is Trying To Convert The Revo ..

entjoles 05.03.2007 09:36 PM
do you mean in hawaii?


All times are GMT -4. The time now is 09:18 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.