replace hacker c-50 with what motor??
 

I have the old hacker setup with a master car controller and a c-50 maxx motor and the shaft of the motor snapped. It's $50 for parts and I can get a different motor for around $70, just not a hacker, so: WHAT IS A GOOD MOTOR FOR MY E-MAXX WITH A HACKER CONTROLLER AND TWELVE CELLS,BEST BANG FOR MY BUCK? Thanks guys!

I am not sure how an XL motor works with the Hacker esc, but it costs around $80, and is the best bang for the buck around.

ok
 

xl what? bk, feigao, lehner, they all make an xl, and what turn do I need for 12 cells in my e-maxx, someone please help!

Feigao's are the best bang for the buck.... what ESC you have & how many amps can it handle....?

For 12 cells in a truck, I'd be thinking 7XL or 8XL. the 8XL would be my choice between the two. It will run cooler and allow for taller gearing.

thanx guys
 

it'll be 12 cells, its the hacker master car controller, i think 90 amps? so it sounds like a feigao 8xl then?? what do you guys think?? Thank you!!

Sorry I didn't clarify. I was talking about the Feigao XL motors. The 8xl like you mentioned should work great.