lipo help for lazer zx-5 mm 6900
 

can i run this lipo from maxamps (Lipo 12000HV 2S3P 7.4V Pack ) in my lazer zx-5 4wd buggy?
Im running mamba max set up 6900 motor
if not what then?
I want the best..money is not an option.
2c stands for two cell ...what does 3p? Hv ..hight voltage?
sorry i am new to bl and lipo stuff
thanks ppl for the help!

eh would it fit.. maybe?? (i always leave room for possibility's) but in my reality i would say no. That is one seriously massive battery. most of the guys on here say the 8ah (amp hour) packs are too large even for their 1/8 scale monsters. if it were me id stick with the 5 amp hour pack or something similar in physical dimensions. any larger your doing your 10thscale a disservice.

2s = two cells run in series ...more volts
3p= three cells run in parallel ... more mah

I'd look into the Trakpower Lipo pack that Mike sells in the store here. I use them in my T4's and love em.

http://www.rc-monster.com/proddetail...rod=tp49002s19

Trakpowers probably the best you can get.

If you are using the stock chassis that comes with the Lazer, in most cases you won't have any trouble at all. If you are using the KM Concept modified chassis for the ZX-5, it is absolutely impossible.
Go with the TrakPower pack.

Also, this thread should be moved to the general electric forum. It just does not fit here...:)

there are always possibilities. you can fit a cinder block on there if you wanted to.

Unless he can make a lipo saddle pack( which only maxamps has them) it surely is impossible to fit a flat pack in a chassis with 3x3 configuration.