problem in install schulze 18.61 on Feigao 6s
 

hello guys ..
i just have these two speed control/motor and i dont know how to install them ,, i used the manual and it didnt work ,, just it beeps when i connect the pack and nothing happen ://

anything well be helpfull

**this is my first time in brushless :/

What vehicle is it in? What radio are you using?

I had a schulze 18.61 (until I fried it) and it would not work at all with a stock traxxas radio system.


On a 2 channel radio.
Make sure you have the controller in channel 2 the servo in channel 1 and a fresh receiver pack in the battery channel on the receiver. Probably obvious but I figured I'd mention it.

Also, make sure the channel 2 is not in the reverse position(must be in normal position).