Brushless Matrix Pro and Hobao Hyper 8.
 

We finally got around to snapping some pictures of our conversions! :)

One of our highest priorities was to make it easy to remove all electronics thus making it easier to maintain. By loosening only two screws we can remove all electronics except the steering servo! We placed the electronics quite high so water and dirt could not get to it.

Comments and constructive criticism are very welcome! :yes:

It the pictures you can see:
Mamba Max
Lehner 1940/8
TrueRc 4S 8000mah
Matrix Pro
Hobao Hyper 8 Pro

http://smail.dyndns.org/album/?cwd=R...ID=1&size=orig
http://smail.dyndns.org/album/?cwd=R...ID=2&size=orig
http://smail.dyndns.org/album/?cwd=R...ID=3&size=orig
http://smail.dyndns.org/album/?cwd=R...ID=4&size=orig
http://smail.dyndns.org/album/?cwd=R...ID=5&size=orig
http://smail.dyndns.org/album/?cwd=R...ID=6&size=orig
http://smail.dyndns.org/album/?cwd=R...ID=7&size=orig
http://smail.dyndns.org/album/?cwd=R...ID=8&size=orig
http://smail.dyndns.org/album/?cwd=R...ID=9&size=orig

http://smail.dyndns.org/album/?cwd=R...D=10&size=orig
http://smail.dyndns.org/album/?cwd=R...D=11&size=orig
http://smail.dyndns.org/album/?cwd=R...D=12&size=orig
http://smail.dyndns.org/album/?cwd=R...D=13&size=orig
http://smail.dyndns.org/album/?cwd=R...D=14&size=orig
http://smail.dyndns.org/album/?cwd=R...D=15&size=orig
http://smail.dyndns.org/album/?cwd=R...D=16&size=orig

Very nice looking buggies. How does the Velcro hold the electronics? Have they ever gotten loose and fell off?

The electronics has gotten loose a couple of times actually so when I drive on a buggy track I use *nylon zip ties around my ubec and esc. I drive alot onroad aswell and then the Velcro works fine! The Velcro we use are made out of hardplastic and both sides look the same, they are quite strong and dirt does not effect them much.

*It think its called that in english https://www.uniserv.nu/butiken/asset...es/1516005.jpg