how to wire 2s2p + 3s2p tap connectors...
 

Hello,

I will use 2 lipos, 1 x 2s2p + 1 x 3s2p on my Emaxx. The 2 batteries are connected in order to provide equivalent of 5s2p (serial).
I have a cellshield cut off. I need to build a Y cable to link the 2 tap connectors of the lipos and to connect them to the cellshield.

I saw 2 different options :

http://scriptasylum.com/rc_speed/_pi....gif~146~0~~14

or

http://scriptasylum.com/rc_speed/_pi....gif~146~0~~14

and I don't know which one I should use in my case. Anyway, the 2 lipos will be connected, so I planned to build the Y cable as in the first picture... but I would like to get some confirmation. Or recommendations / advises if any

Thanks

i think i found my answer after some deeper researches...

http://www.rc-monster.com/forum/showthread.php?t=6686