E-maxx bellcranks
 

Anyone know of a good bellcrank for the E-maxx besides Pro-line and UE? (Pro-line is Discontinued and UE doesnt have any in stock or the parts to build one)

There are several on ebay now....search "emaxx bellcrank"

I know it sucks that you cant just buy one outright. Sometimes if you email Robin at UE he will throw one together for you...he's done it for me twice.

Good luck

Ok if they aren't back in stock by next week I'll try that. Thanks

The proline strg set wasn't that good - the arms became too flexible as they got a little run time on them and they require dremel work to fit a emaxx chassis. I wanted anything that was alum and would let me use brgs so this is what I used - I have two sets of these in two diff Tmaxxes and they been solid and caused no trouble. Way cheaper than a gen iv, but does require a separate saver which is the downside.

http://www3.towerhobbies.com/cgi-bin...&I=LXUL71&P=ML

This just duplicates the stock parts in alum.

Yeah I thought that the Pro-line looked a little weak for the application I wanted to use it for but im going to get a UE servo saver, found that I can buy parts to make it seprately.(Always out of stock) I have that bellcrank on my Basher Maxx, Works pretty good but my FLM Maxx might be to heavy for it.