Converting LBA10 3s connector to 4s - Help!
 

I need one of these, forgot it in my build and I need it 1 day express shipped to me. All the businesses I call charge around $25 for 1 day and I know it's not that much. I just need the cable to go from the LBA to the pack for 4s LiPos. Someone help me out?

EDIT: See last post with the pics. I think I got it but someone please let me know if ALL the wires go straight across. I can't tell in the pic since the wires are bent.

BPP are out your way see what they can do...

Bro, check www.allerc.com it's cheap.... if you can't get it.. I can get one to you... Where abouts are you at... I just bought 4x (4x different kinds of universal balancers.. spent $100 on them for my Two 1210i... so I don't really need the 4S balancer... what's your address?...

Do you have extra cables/connectors that you can scavange to make your own?

I only have 2S and 3S cables. You have a PM aqwut.

And what's BPP?

Oh, and I'm 99% sure this is the cable I need: http://www.allerc.com/product_info.p...oducts_id=2565

$25 1 day shipping from them too...for a $3 cable that should be sent in an envelope and only cost $10 for shipping :cry:

/sad panda

Something I just noticed about what Brian said. I think I can turn the 3s one into a 4S unit if I use a wire and prong from the 2S cable. Anyone else done this? I think it could work.

4S-
http://www.allerc.com/images/Pictures/HP-LB10MCH4S.jpg

3S-
http://www.allerc.com/images/Pictures/HP-LB10MCH3S.jpg

I think I got it, I removed one of the wires from the 2S and put it on the 3S to make it 4S. I moved all the wires over except the first one to make everything line up. Is this right? Does anyone have a picture of one without a bend in it? I think I got it but someone please let me know if ALL the wires go straight across. I can't tell in the pic since the wires are bent.

that's what I did dude... and take off that 3S sticker..
mine came with 2 LBA10... and each LBA 10 comes with 2S & 3S cable... like you said, take one of the prongs from the 2S, and put it on the 4S... it's really easy to do...

Sweet! You did move over all but the first one right? I had to move the red wire and 2 black wires over one position to fit in the unused holder. That's what the connector looks like in the pictures from what I can tell. Do you know what I mean?

Yeah, that's what I meant.

The wires do go straight across, but you'll have to move the existing red and black wires up a notch and then add the other wire.