RC-Monster Forums - Hybrid Outrunner/Inrunner

RC-Monster Forums (https://www.rc-monster.com/forum/index.php)

- Brushless (https://www.rc-monster.com/forum/forumdisplay.php?f=12)

- - Hybrid Outrunner/Inrunner (https://www.rc-monster.com/forum/showthread.php?t=9269)

lincpimp

12.31.2007 03:22 AM

Hybrid Outrunner/Inrunner

Someone had posted this before but I was wondering what you guys thought they would be good for. Looks like the 1600 and 2000kv would be the most useful. Good for 5s and 6s respectively, figuring that 40k rpm would be the highest to run the motor at. I wonder what application they would be best in?

Heres a link:http://www.hobbycity.com/hobbycity/s...idProduct=5421

t-maxxracer32

12.31.2007 03:25 AM

how would that compare to lets sayyy

a $280 2.5d?

i mean for 40 bucks you could get an extra pair of lipos instead of spending the other 240 on the motor.

lincpimp

12.31.2007 03:35 AM

Quote:

Originally Posted by t-maxxracer32 (Post 137434)

how would that compare to lets sayyy

a $280 2.5d?

i mean for 40 bucks you could get an extra pair of lipos instead of spending the other 240 on the motor.

Most likely a case of "you get what you pay for".

t-maxxracer32

12.31.2007 03:51 AM

ya you are probably right. still it is BL and im sure it would be very nice.

maybe it would not last as long or somethign.

Patrick

12.31.2007 05:28 AM

Quote:

Originally Posted by t-maxxracer32 (Post 137434)

how would that compare to lets sayyy

a $280 2.5d?

i mean for 40 bucks you could get an extra pair of lipos instead of spending the other 240 on the motor.

It might be ok, but it's 15mm shorter than a 1515, and isn't rated for the same power output.

lutach

12.31.2007 11:51 AM

They are 6 polers like the Align 600L. I'm thinking about getting one just to see if they compare to the 600L. I had my 600L putting out over 3700 watts and it is still working good.

All times are GMT -4. The time now is 05:54 PM.