EMAXX parts question.....
 

What is the difference between these two part numbers? 5451R vs. 5451

Which one will fit both the old and new Emaxx?

thanks!

err 5451 is the plastic sliders and 5451R are the metal cvd;s.

They are for the revo - Not an emaxx person but understood that they did work...

They are 3.3 spec. They will fit the #3905 New E-Maxx. The #3906 will need additional parts or modifiction to fit, such as 3.3 axle carriers and turnbuckles.

The part number for the new E-Maxx is 5451X. I'm not sure what the difference is.

5451X is the steel cvd drive shaft
5451R is the plastic slider drive shaft

See here:

http://www.traxxas.com/products/elec...905-071218.pdf

Maybe I'm dyslexic.....how bout 5154 vs. 5451R. What I'm trying to figure is the set of (4) cvd's vs. this

http://www3.towerhobbies.com/cgi-bin...&I=LXPNK0&P=ML

Nevermind my comment about the old emaxx, I'm set up like the new one with all the 3.3 stuff.
I have the 3.3 sliders and am looking for an alternative. (Proline shock perchs are rubbing the sliders)

The 5154 is just the steel shaft. You need the 5451R.

These:

http://www3.towerhobbies.com/cgi-bin...FVSEARCH=5451R

The 5154 is the 1 shaft only the 5451R is the assembled set of 4. Sorry for the confusion.

Another part question. I need a front body mount(the round type and in plastic). According to the LHS they are not making them anymore. Beside the Proline tall type for the rear mount is anyone making the front mount in the round version? I have the FLM shock towers and don't wish to change them to accomodate the newer square type.

Thanks.

I heard that the Losi LST body post will fit, and I think that Rc Raven makes round post too.

I'll check those out, thank you.