[RC-Monster Mike]

Funny - Brian mounted the rear brace the same way. The rear brace(latest versions have two rear braces - one for a smooth motor and one for a Feigao "c" motor) has a recess milled into it so it rests on the lower plate. While I am sure the screws will hold the motor just fine, the idea was to have the rear brace only held in position/adjusted by the screws(one screw would be plenty) with the recess over the lower plate. Basically, the rear brace is backwards, though I am sure it will work fine(my fault, as I did not include any instructions). :)