RC-Monster Forums - View Single Post

Batfish · 07.05.2005, 11:21 AM

I sent another email to FMA support asking if the internal connections would have any problems keeping up with the amps, provided the battery connector could keep up.
The reply I received was "It will not effect the other wiring."

So, for anyone else concerned about the 60 amp limit listed for the FMA/Kokam packs - as long as you have a capable battery connector you should be able to get the full draw out of the packs and ignore the 60 amp limit issue.

I'm glad I got this settled with FMA.

Thanks to all who responded.

	(#19)
Batfish RC-Monster Aluminum Offline Posts: 617 Join Date: Apr 2005 Location: MA	07.05.2005, 11:21 AM I sent another email to FMA support asking if the internal connections would have any problems keeping up with the amps, provided the battery connector could keep up. The reply I received was "It will not effect the other wiring." So, for anyone else concerned about the 60 amp limit listed for the FMA/Kokam packs - as long as you have a capable battery connector you should be able to get the full draw out of the packs and ignore the 60 amp limit issue. I'm glad I got this settled with FMA. Thanks to all who responded. Joe Electronics run on smoke... if you let the smoke out, they stop working.