RC-Monster Forums - View Single Post

BrianG · 04.29.2007, 11:08 PM

Welcome to the forums!

People are still trying to figure out the CRT.5 conversion steps. Most people want to use a plastic spur, but there are fitment problems (diff length). So, some are using a steel pinion on the steel spur, which isn't the "best" way, and some are modding the chassis. The center diff is the biggest hurdle. After that, it's just a matter of making your run-of-the-mill motor mount and battery tray. The good news is that there are a couple people (Mike included) who are working on some custom plastic spurs.

	(#9)
BrianG RC-Monster Admin Offline Posts: 14,609 Join Date: Nov 2005 Location: Des Moines, IA	04.29.2007, 11:08 PM Welcome to the forums! People are still trying to figure out the CRT.5 conversion steps. Most people want to use a plastic spur, but there are fitment problems (diff length). So, some are using a steel pinion on the steel spur, which isn't the "best" way, and some are modding the chassis. The center diff is the biggest hurdle. After that, it's just a matter of making your run-of-the-mill motor mount and battery tray. The good news is that there are a couple people (Mike included) who are working on some custom plastic spurs.