RC-Monster Forums - View Single Post - ST-R Brushless Help!!!????

str8up · 05.03.2007, 03:41 PM

Cool thanks guys. Everyone has helped out alot. I currently have the 5000 in 3 cell and ran it with my evader with the mamba 5700 and it lastested forever and ran reall really good.
SO MY LIST IS -
currently own -
MM esc
Fans
Rx batt and Nomadio with telemetry
buying later tonight if no objections from fellow rc'ers
Feigao 540c (has the heat sink already) 8xl
5mm bore 13 - 18 pinions
max amps 5000hv 4s lipo

I am going to disable my internal bec and i believe i do this by disconnecting the red center wire from plug on the esc and set the cutoff in the settings to no cutoff. please correct me if i am wrong but from everything i have seen and read that is the way to do. Again thank you all for the help.

	(#11)
str8up BL savage in the works Offline Posts: 13 Join Date: May 2007 Location: West Branch	05.03.2007, 03:41 PM Cool thanks guys. Everyone has helped out alot. I currently have the 5000 in 3 cell and ran it with my evader with the mamba 5700 and it lastested forever and ran reall really good. SO MY LIST IS - currently own - MM esc Fans Rx batt and Nomadio with telemetry buying later tonight if no objections from fellow rc'ers Feigao 540c (has the heat sink already) 8xl 5mm bore 13 - 18 pinions max amps 5000hv 4s lipo I am going to disable my internal bec and i believe i do this by disconnecting the red center wire from plug on the esc and set the cutoff in the settings to no cutoff. please correct me if i am wrong but from everything i have seen and read that is the way to do. Again thank you all for the help.