RC-Monster Forums - View Single Post - Problem with fitting UE diffs in FLM bulks;

Serum · 05.14.2007, 01:54 PM

Okay, i see what your point is; I used blue loctite silicone gasket to keep them in place, you can make some rings from foam to center them. I used the loctite silicone stuff on the two ~7 mm things that stick into the bulk.

	(#4)
Serum RC-Monster Admin Offline Posts: 10,480 Join Date: Feb 2005	05.14.2007, 01:54 PM Okay, i see what your point is; I used blue loctite silicone gasket to keep them in place, you can make some rings from foam to center them. I used the loctite silicone stuff on the two ~7 mm things that stick into the bulk.