Quote:
|
Originally Posted by zeropointbug
May I suggest going with a 9XL instead? I am running a 7XL with 5s A123 2p, it is crazy fast, 6s on 8XL would be even faster, and hotter most likely.
I wish had went with an 8XL instead for 5s2p as mine is way powerful enough, so I would not mind milding it down a tad, plus running a little cooler as well.
|
zeropointbug, unfortunatley I've already got my 8XL and my wife breathing down my back about swapping out from a and I quote her, "perfectly good truck for some piece of junk that's going to cost us $2000.00 to find every weak link in and rebuild, AGAIN!!". I have this problem with projects, I love them. lol...
On that thought though, 5s would be 18.5 volts, I'd be running the A123, only 3.3v per, so only 19.8 volts (I'd be running 6S, 2 - 6 cell 2300s in seris for 4600 mah), yea. close to the bleeding edge, but the Nemesis motors are cheap and I don't plan on blasting her wide open for long halls, I just like to have that little extra "pop" at top edge of the jumps :027: :027:
I'll run mikes heatsync & fan setup with the case colling mod on the Quark, adn starp mikes with heatsync\clamp on the motor with a nice block of aluminum under the can synced to the chassis and cross my fingers. I've been looking for a ggod excuse to snag me a Neu or a nice 1950 :004: :004: