RC-Monster Forums - View Single Post

HotnCold · 05.27.2007, 07:41 AM

Im going to go with crazyjr on this one also - it sounds like a backpressure problem - as long as when all this happened it happend at the same time - if after replacing the coupler - it was another day or another temperature outside or humidity change - that could lead to it as well... as far as changing glow plugs and then starting - i would check to see how much fuel is in the motor when you change the plug - take out the plug and turn the revo over and shake it - see if any fuel spills out - could be too much fuel and that could cause problems as well... But get the right size coupler and try it again - post back when you get the problem figured out -

	(#2)
HotnCold RC-Monster Admin Offline Posts: 1,065 Join Date: Dec 2004 Location: RC-Monster Store....Where else?	05.27.2007, 07:41 AM Im going to go with crazyjr on this one also - it sounds like a backpressure problem - as long as when all this happened it happend at the same time - if after replacing the coupler - it was another day or another temperature outside or humidity change - that could lead to it as well... as far as changing glow plugs and then starting - i would check to see how much fuel is in the motor when you change the plug - take out the plug and turn the revo over and shake it - see if any fuel spills out - could be too much fuel and that could cause problems as well... But get the right size coupler and try it again - post back when you get the problem figured out - Hows that "Hope and Change" working out for Ya???