RC-Monster Forums - View Single Post

MetalMan · 05.31.2007, 11:12 PM

I got my Hyper 8 over to the track today with Neu 1512 2.5D and MM. Normally it is geared 18/46 (4s Lipo), but today I geared it 14/44. Cogging occurred MUCH less, but it was still there. Start power was high, timing was high (but not "highest"), punch control at 50%. Runtimes were good (BP-Revo could confirm) with only 5000mah, and nothing really heated up. The motor and ESC were both at about 118 (no fans), and the battery was at 100. This is definitely a good setup :).

	(#359)
MetalMan RC-Monster Mod Offline Posts: 5,297 Join Date: Mar 2005 Location: SoCal	05.31.2007, 11:12 PM I got my Hyper 8 over to the track today with Neu 1512 2.5D and MM. Normally it is geared 18/46 (4s Lipo), but today I geared it 14/44. Cogging occurred MUCH less, but it was still there. Start power was high, timing was high (but not "highest"), punch control at 50%. Runtimes were good (BP-Revo could confirm) with only 5000mah, and nothing really heated up. The motor and ESC were both at about 118 (no fans), and the battery was at 100. This is definitely a good setup :). SH Z-Car, Custom Crawler, 8s Savage, 12s XTM XLB 1/7 buggy, 4wd 4-link rear/IFS Pro4 truck, Custom Hyper 10 Short Course, Belt-Drive Mammoth ST 1/8 truggy, 4s 17.5 MM Pro HPI Blitz