RC-Monster Forums - View Single Post - 60 mph mamba brushless setup for e-maxx, would this work?

Serum · 06.04.2007, 04:55 PM

I would rather use one single XL motor and make the truck as light as possible. it will be more agile than with 24 cells and 2 14oz heavy motors.

Not to mention the stress it will put on the drivetrain; plain simple; it's about the power/weight ratio. one single XL motor is more than enough in terms of power/torque to launch your truck at warp speed in the blink of an eye.

60mph might sound cool, but it takes quite some expensive upgrades to be a solid ride..

Te dynamite chassis is poop, it's a cheap molded chassis. (gpm quality) get the FLM instead, you can put cells on top and bellow the chassis as well. there are special braces available that make it work.

	(#6)
Serum RC-Monster Admin Offline Posts: 10,480 Join Date: Feb 2005	06.04.2007, 04:55 PM I would rather use one single XL motor and make the truck as light as possible. it will be more agile than with 24 cells and 2 14oz heavy motors. Not to mention the stress it will put on the drivetrain; plain simple; it's about the power/weight ratio. one single XL motor is more than enough in terms of power/torque to launch your truck at warp speed in the blink of an eye. 60mph might sound cool, but it takes quite some expensive upgrades to be a solid ride.. Te dynamite chassis is poop, it's a cheap molded chassis. (gpm quality) get the FLM instead, you can put cells on top and bellow the chassis as well. there are special braces available that make it work.