RC-Monster Forums - View Single Post

RC-Monster Mike · 07.12.2005, 08:08 PM

Off topic, but FLM is including a modified spider cross pin in the diff cups now, to address the "needs slight modification" issue.
For the Revo diffs, I have only tried the Maximizer diff cups so far. I will try the 3racing cups in the near future, and FLM is making some diff cups with 3mm screws attaching the ring gear (stronger than the 2.5mm stockers, and the screws are easier to come by). Serum described shimming as I would have. As tight as possible while still being smooth. This applies to building any diff.

	(#43)
RC-Monster Mike Site Owner Offline Posts: 4,915 Join Date: Nov 2004 Location: PA	07.12.2005, 08:08 PM Off topic, but FLM is including a modified spider cross pin in the diff cups now, to address the "needs slight modification" issue. For the Revo diffs, I have only tried the Maximizer diff cups so far. I will try the 3racing cups in the near future, and FLM is making some diff cups with 3mm screws attaching the ring gear (stronger than the 2.5mm stockers, and the screws are easier to come by). Serum described shimming as I would have. As tight as possible while still being smooth. This applies to building any diff.