RC-Monster Forums - View Single Post

waterdog49 · 06.15.2007, 05:08 PM

i run the Schulze 40.160 control with Neu motor set-ups in all my fast electric [SAWS] record time trials boats...

if you choose the Schulze 40.160 control to use in a Neu motor application it must be a 40.160 [v14 series] or newer v15, v16, etc.

the earlier version 40.160 controls [v12. v13, etc.] had a start-up problem when used with Neu motors... you can send your older schulze control back to Germany to have it up-dated if necessary...

i've run a 40.160 [v-14] in my Q. S. and T-Mono [SAWS] record time trials boats [mono's] for going on three years and have not had any problems... zero-zip-nada

i've run the schulze 40.160 in combo with...

Neu 2215 1.5YF "BAM" on [32] IB4200 wc cells
Neu 1521 1YF on 24 IB4200 wc cells
Neu 1521 1.5D on 18 IB4200 wc cells
Neu 1515 1YS on 18 IB4200 wc cells

Ron

	(#22)
waterdog49 Team F.U.B.A.R. Racing Offline Posts: 19 Join Date: Jun 2007 Location: Central Florida	06.15.2007, 05:08 PM i run the Schulze 40.160 control with Neu motor set-ups in all my fast electric [SAWS] record time trials boats... if you choose the Schulze 40.160 control to use in a Neu motor application it must be a 40.160 [v14 series] or newer v15, v16, etc. the earlier version 40.160 controls [v12. v13, etc.] had a start-up problem when used with Neu motors... you can send your older schulze control back to Germany to have it up-dated if necessary... i've run a 40.160 [v-14] in my Q. S. and T-Mono [SAWS] record time trials boats [mono's] for going on three years and have not had any problems... zero-zip-nada i've run the schulze 40.160 in combo with... Neu 2215 1.5YF "BAM" on [32] IB4200 wc cells Neu 1521 1YF on 24 IB4200 wc cells Neu 1521 1.5D on 18 IB4200 wc cells Neu 1515 1YS on 18 IB4200 wc cells Ron time trials videos... http://www.rcboatingdistributors.com/SAWVideo.htm electric truggy conversion pictures... http://skellyo.com/Ron/ Team F.U.B.A.R. Racing