RC-Monster Forums - View Single Post

Shadow350Z · 11:35 AM

yeah i got information from one18th.com
They are saying use "DIFF SHIMS"

"spoolin ex"-shims should fix it, i have 7 shims in the rear and 5 in the front on my mt

here tip
by "Ice"
take the dogbones out of the outdrives. then take a 1.5 size alen key in one of the 2 outdrives(one of the outdrives dose not have a slot for the allen key, one dose) right to tight left to loosen

heres another tip
taken from one18th.com by "moose"
The stock dogbones tend to flex and pop out. Buy a pack of losi mini-t dogbones (stock) and use those to replace the RC18T ones. They are just a hair longer and will not flex like the stock plastic ones.
PIC will not attch for some reason but pin-to-pin measurements are:
RC18T-45mm
MiniT- 46mm

	(#5)
Shadow350Z RC-Monster Carbon Fiber Offline Posts: 416 Join Date: Jun 2005 Location: CA	07.15.2005, 11:29 AM yeah i got information from one18th.com They are saying use "DIFF SHIMS" "spoolin ex"-shims should fix it, i have 7 shims in the rear and 5 in the front on my mt here tip by "Ice" take the dogbones out of the outdrives. then take a 1.5 size alen key in one of the 2 outdrives(one of the outdrives dose not have a slot for the allen key, one dose) right to tight left to loosen heres another tip taken from one18th.com by "moose" The stock dogbones tend to flex and pop out. Buy a pack of losi mini-t dogbones (stock) and use those to replace the RC18T ones. They are just a hair longer and will not flex like the stock plastic ones. PIC will not attch for some reason but pin-to-pin measurements are: RC18T-45mm MiniT- 46mm http://img.photobucket.com/albums/v4...Dragon350Z.png Last edited by Shadow350Z; 07.15.2005 at 11:35 AM.