RC-Monster Forums - View Single Post - More BK issues. Am i doing something wrong?

Mightytaco · 06.19.2007, 08:07 AM

I didnt think of the voltage drop issue. I'll retry my tests later with my good lipo pack. The motor is used, so who knows what temeratures it has reached. A motor thats gotten hot could draw more power? I did notice the wires to the motor were a bit warm, could a bad solder joint between the motor connector and wire cause excess amp draw? Everything else looked good. It rolls real nice and the mesh is good. Tires are just standard 1/8th scale tires/rims.

	(#6)
Mightytaco RC-Monster Stock Offline Posts: 48 Join Date: Apr 2007	06.19.2007, 08:07 AM I didnt think of the voltage drop issue. I'll retry my tests later with my good lipo pack. The motor is used, so who knows what temeratures it has reached. A motor thats gotten hot could draw more power? I did notice the wires to the motor were a bit warm, could a bad solder joint between the motor connector and wire cause excess amp draw? Everything else looked good. It rolls real nice and the mesh is good. Tires are just standard 1/8th scale tires/rims.