Brian, I finally put the Basic XL3100 in the .5. I ran it for about 15min and temps were as follows: Motor 145f, ESC 137f, Lipo 110. I think that was pretty good considering that it was geared for about 50mph(20t pinion). Also, this motor geared with a 15-16 pinion should be right on the money on 3s. I put the 10L back in right now until I can get a smaller pinion.

BTW I put 10k CD oil in it and it still wheelies(but less than before). I'm going to get 5k and see if that helps. Also, the 10L has noticeably more torque than the XL3100. I think that an L sized motor or one of the new Lenher XXL motors(are they even out yet?) are really what you need for this truck.

Bye:018: