RC-Monster Forums - View Single Post

jdtmaxx · 11:41 AM

they should be on the carb. there are factory settings for different engines.for instance the high speed needle should be 3 1/2 turns out from closed. and the low speed should be about 1 1/2 turns out from closed. and does it idle real low. if it does ,raise the idle.

	(#6)
jdtmaxx RC-Monster Stock Offline Posts: 32 Join Date: Jun 2007	06.19.2007, 10:15 PM they should be on the carb. there are factory settings for different engines.for instance the high speed needle should be 3 1/2 turns out from closed. and the low speed should be about 1 1/2 turns out from closed. and does it idle real low. if it does ,raise the idle. Last edited by jdtmaxx; 06.20.2007 at 11:41 AM.